Enlarge
Swing-Arm Height Restrictor HBS 50clearance up to 2.8 m
- Adjustable clearance up to 2.8 m – overall height 3.0 m.
- The arm swings aside by hand and locks in 90° steps.
- Widths 2,500–12,000 mm, white with red reflectors or hot-dip galvanized.
Accessories and spare parts9 matching products View ↓
- Width
- 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm
- Finish
- Hot-Dip Galvanized / Galvanized, Hot-dip galvanized and painted
- Overall Height
- 3000 mm
- Maximum Drive-Under Height
- 2800 mm
Not sure what fits? Call +46 10 153 90 50
Suitable for these environments
Description
Swing-arm height restrictor HBS 50 – stops over-height vehicles at the entrance
The HBS 50 swing-arm height restrictor is a barrier arm on a pivot post that shows drivers the clearance height and prevents over-height vehicles from entering. The clearance can be set up to 2.8 m and the overall height is 3.0 m. When a taller vehicle needs to be let in, the arm is swung aside by hand. The height restrictor is designed for outdoor installation, for example at car park entrances, freight terminals and loading bays, and at fuel stations.
Features
- Clearance height adjustable up to 2.8 m, overall height 3.0 m above ground
- The arm swings horizontally and can be locked in 90° steps at the main post
- Stainless steel turning handle at an operating height of 0.7 m above ground
- Aluminum barrier arm, 86 × 46 mm, with a slot for signs and advertising
- Wire rope reinforcement with turnbuckle from a width of 3,500 mm
- Support post 70 × 40 × 3 mm for the free end of the arm, height-adjustable +250/−0 mm
- Lockable with a padlock or, as an option, with a fire brigade triangle lock or a profile cylinder with automatic locking
- Available in white with red reflectors or hot-dip galvanized with red and white reflectors
- Bolted down via a base plate or cast-in
Dimensions and design
The HBS 50 is available in widths of 2,500, 3,000, 3,500, 4,000, 4,500, 5,000, 5,500 and 6,000 mm as a single unit, and in 7,000, 8,000, 9,000, 10,000, 11,000 and 12,000 mm as two opposing units that meet in the middle. The overall height is 3.0 m (3000 mm) above ground, and the clearance height can be set steplessly up to 2.8 m by loosening the four nuts on the arm bracket. If you need a different height, the sister model HBS 54 offers a clearance of up to 3.8 m and an overall height of 4.0 m.
The pivot post is a steel tube Ø 121 × 4.0 mm, tapering at the top to Ø 101.6 × 2.9 mm. The barrier arm is an 86 × 46 mm aluminum profile. You can choose between two designs: hot-dip galvanized and powder-coated in white, RAL 9010, with red retro-reflective rings, or hot-dip galvanized only, with red and white reflectors on the arm.
The 6,000 mm version weighs approx. 210 kg (gross weight) and has transport dimensions of 6,000 mm in length, 400 mm in width and 440 mm in height. The country of origin is Germany and the HS code is 73089098. All dimensions can be found in the Technical data table and on the drawing under the Documents and certificates tab.
Material and durability
All steel parts are hot-dip galvanized and, in the white version, additionally polyester-coated in RAL 9010. The pivot post is made of steel tube, the barrier arm of aluminum profile and the turning handle of stainless steel. From a width of 3,500 mm, the arm is reinforced with a stainless steel wire rope and turnbuckle.
Mounting
The height restrictor is bolted to the surface via a 250 × 250 mm base plate with a 210 × 210 mm hole pattern, or cast-in. For cast-in mounting in a new foundation, an anchor cage is available as an accessory. The arm is turned using the turning handle, positioned 0.7 m above ground, and locked in the desired position with a padlock. Options include a lock housing with profile cylinder, a fire brigade triangle lock to DIN 3223, and forced locking, where the key can only be removed in the closed position. A suspended bar hung on chains can be fitted beneath the arm as an accessory. Mounting instructions and foundation plans for both bolt-down and cast-in mounting can be found under the Documents and certificates tab.
Frequently asked questions
What is the difference between the HBS 50 and the HBS 54?
The height. The HBS 50 has an overall height of 3.0 m and a clearance of up to 2.8 m. The HBS 54 has an overall height of 4.0 m and a clearance of up to 3.8 m. The design is otherwise identical.
What if the entrance is wider than 6 meters?
Widths of 7,000–12,000 mm consist of two units positioned opposite each other that meet in the middle.
How is the arm locked?
With a padlock at the main post, in 90° steps. Optionally, a lock housing with profile cylinder or a fire brigade triangle lock with automatic locking is available.
How is the height restrictor mounted?
It is bolted down via a 250 × 250 mm base plate with a 210 × 210 mm hole pattern, or cast-in. Foundation plans for both methods can be found under the Documents and certificates tab.
Which design should I choose?
Both have the same hot-dip galvanized steel construction. The white version is additionally powder-coated in RAL 9010 and has red reflectors. The hot-dip galvanized version is unpainted and has red and white reflectors on the arm.
Technical data
- Width
- 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm
- Finish
- Hot-Dip Galvanized / Galvanized, Hot-dip galvanized and painted
- Overall Height
- 3000 mm
- Maximum Drive-Under Height
- 2800 mm
- Material
- Steel and aluminum
- Boom Dimensions
- 86 x 46 mm
- Pivot Post Diameter
- 121 mm
- Floor Plate Dimensions
- 250 x 250 mm
- Mounting Hardware
- Anchored
- Locking Mechanism
- Padlock
- Retroreflective Ring Color
- Red
- Item no.
- MANNUS-HBS50
Mounting and fixing2 pcs
Choose the fixing for your surface. Installation instructions are under Documents.
We don't do site visits or installation, but we're happy to answer questions about surfaces and fixings.
Accessories and spare parts7 pcs
Documents and certificates6 files
Delivery, payment and returns
- Delivery time
- 16-22 business days
- Shipping
- Calculated at checkout from weight, volume and delivery address. Heavy and long products are shipped on a pallet.
- Delivery
- To the property line or gate with tracked shipping. Unloading is not included – let us know if a tail lift is needed.
- Payment
- Card, PayPal, Apple Pay and Google Pay. 30-day invoice for businesses, associations and the public sector.
- Returns
- Private customers have a 30-day right of withdrawal. Businesses contact us before returning. Made-to-measure products are excluded.
- Complaints
- Report transport damage to us – we'll handle it with the carrier.











